In the world of particle size analysis, test sieve analysis is possibly the oldest method of testing the size and consistency of the particles of a product. As time went on, technology gradually started playing a more significant role in gathering accurate and repeatable results.
This leaves lab technicians responsible for incorporating equipment, such as sieve shakers, to ensure their test sieve analysis operation is as efficient as possible. But with so many sieve shaker variants, such as the W.S. Tyler RO-TAP® RX-812, it’s essential to know how each one differs.
So, what exactly is a RO-TAP RX-812?
W.S. Tyler has manufactured various RO-TAP Sieve Shaker models since the 1930s and is here to help you determine what sieve shaker will deliver the best results for your operation.
To that end, this article will encompass:
The W.S. Tyler RO-TAP RX-812 is a mechanical sieve shaker that is simply orbital. This means that, unlike the standard RO-TAP RX29, these devices rely on a circular motion with no tapping mechanism to promote particle movement through a sieve stack.
Having said that, the RO-TAP RX-812 is designed to analyze particles that are 100 mesh and larger. This is because particles this large don’t require the tapping hammer motion of the RX29 to be broken up.
Footprint: 23" wide x 15" deep x 31.5" high (59cm x 38cm x 80cm)
Weight: 55 lbs. (25 kg)
Shipping Footprint: 25" wide x 19" deep x 15" high (64cm x 49cm x 38cm)
Shipping Weight: 95 lbs. (28 kg)
As stated above, the RO-TAP RX-812 mechanical sieve shaker facilities the test sieve analysis process using orbital motion. This orbital motion is carried out using a timing belt and motor, similar to what drives the oscillating motion of other RO-TAP devices.
Additionally, it has the same digital timer as the RO-TAP RX29/RX30, providing lab technicians the ability to set the device to run for up to 99 minutes.
The amount of sieves you can place in a stack depends on whether the sieves are half-height or full-height. When working with 8-inch sieves, the RO-TAP RX-812 can hold six full-height sieves or 13 half-height sieves.
On the other hand, when working with 12-inch sieves, the RO-TAP RX-812 can hold four full-height sieves, six half-height sieves when a full height pan is used, or eight half-height sieves when a half-height pan is used.
To that end, the RO-TAP RX-812 comes with an adapter that makes switching from 8-inch diameter sieves to 12-inch diameter sieves seamless.
When a W.S. Tyler RO-TAP RX-812 arrives at your facility, minimal setup is required. In fact, setting up the RX-812 is a simple as plugging the device into an adequate power source, placing your sieves into the sieve housing, securing the sieve stack by fastening the lid, setting the timer, and pressing the start button.
Having said that, because it does have the heavy metal used for all RO-TAP devices, you will want to make sure it is placed onto a steady, secured table or on the floor. This will help to reduce the chance of injury.
With the RX-812, there aren’t as many moving parts as other RO-TAP devices. The parts that are more likely to wear first are the timing belt, the single brass bushing that is used, and the eccentric disc.
Having said that, lab technicians tend to get used to the sound of the sieve shaker, no matter what model it is, and can often hear when something is wrong. If you notice your device requires maintenance, you can either refer to the manual or reach out to our team of experts.
NOTE: As the orbiting motion isn’t as harsh as the tapping and oscillating motion of the RO-TAP RX29, the moving parts of the RX-812 take much longer to wear to a dysfunctional state.
The RO-TAP RX-812 is W.S. Tyler’s least expensive unit. You can expect to pay around $1,731.99 for each unit.
The price of the overall order, however, will vary based on if you need test sieves.
NOTE: Despite which RO-TAP device you select, test sieves are sold separately. For more information on what you can expect to pay for a stack of sieves, read the article: How Much Does a Test Sieve Cost? (Factors and Price Ranges + Video).
The W.S. Tyler RO-TAP RX-812 is a mechanical sieve shaker that relies on a singular orbiting motion to ensure sample material passes through a stack of sieves. Standing as the cheapest RO-TAP model, the RX-812 is the ideal sieve shaker for operations that work with particles 100 and larger.
But to ensure you can consistently yield accurate and repeatable results, you must ensure your lab is furnished with the right equipment. This will help to ensure each aspect of your test sieve analysis, from gathering reliable sample material to weighing how much material each sieve retained, is done with the utmost accuracy.
Having been a prominent particle size analysis leader for over 140 years, W.S. Tyler strives to help lab technicians fine-tune their operations and achieve the best possible results.
To learn more about what equipment your test sieve analysis lab should have, review the following article: