Test sieve analysis is a particle size analysis method that allows manufacturers to calculate the quality of a product and make needed adjustments. As it has been used for centuries, it is used throughout dozens of industries to test hundreds of particle types.
Because test sieve analysis depends on each sieve's mesh openings' accuracy, you must clean your sieves properly after each test. To make this as efficient as possible, lab technicians should employ tools like ultrasonic sieve cleaners.
Having said that, what exactly is an ultrasonic sieve cleaner?
As manufacturers of one of the most widely used lines of test sieves, W.S. Tyler is here to help make your test sieve analysis process the best it can be.
To help, this article will cover:
As there are virtually no moving parts, the unit requires little, if any, maintenance. It should be noted that the vibrations created generate heat, so caution should be taken when using the device.
The cleaner operates on a 110-volt, 60-cycle current to create the vibrations in the cleaning fluid bath. This is what promotes the dislodging of contaminants from both the sieve frame and media.
The device can create vibrations that reach up to 40,000 per second (40 kHz), allowing for a cleaning duration of 5 to 15 minutes. There are models made explicitly for both 8-inch and 12-inch sieves; however, both or designed to clean one sieve at a time.
Because ultrasonic sieve cleaners only use vibrations, they work great when cleaning fine mesh sieves. Other methods, such as hand cleaning with a hand brush, can prove to be less gentle and often lead to damaged sieves when not applied with care.
As stated above, there are models made specifically for either 8-inch sieves or 12-inch sieves. Naturally, an 8-inch sieve model typically costs less than a 12-sieve model.
That said, the price of an 8-inch model costs approximately $1,700, with the 12-inch model costing around $5,500.
To ensure you continue to achieve accurate and repeatable results, you must keep your sieves free of any debris leftover from previous testing. One of the best devices to combat this are ultrasonic sieve shakers.
The minimal amount of maintenance needed to keep an ultrasonic sieve cleaner in tip-top shape is arguably one of its best qualities. Being that, you will want to ensure you rinse away any debris that is removed from the test sieve being cleaned.
Ultrasonic sieve shakers are devices that employ ultrasonic vibrations to dislodge particles plugged in the mesh openings and accumulated throughout a test sieve. Because these vibrations are so gentle, these devices are ideal when cleaning fine mesh sieve.
That said, lab technicians can use ultrasonic sieve cleaners to clean virtually any 8-inch or 12-inch test sieve. And after your sieves are clean, minimal maintenance is needed as you simply rinse any leftover debris from the ultrasonic cleaner.
But no matter how clean your sieves may be, you should always have your sieves certified regularly.
Test sieve analysis is a centuries-old particle analysis technique used to obtain results that reflect the quality of the particles that make up a product. As it is referred to in countless industry standards, it is practiced in dozens of industries worldwide.
That said, you must be able to accurately collect your analysis results to make the most out of your clean sieves. Failure to do so can lead to an end product that does not meet consumer expectations, ultimately hindering your brand’s ability to grow.
With over 140 years of experience manufacturing industry-leading test sieves, W.S. Tyler is here to ensure your test sieve analysis continues to provide accurate and repeatable results for years to come.
For more information about collecting accurate and repeatable test sieve analysis results, review our article: How To Collect Sieve Analysis Data (Process, Analyzing, and Tips).